Industrial Chain and Sprocket Manufacturer

Language:

English

Contact Now！

Home / All

News

Welcome To Visit Us On Shanghai PTC Asia 2024
Join CTS-ChinaTransmissionS at the 2024 Shanghai PTC ASIA for high-quality products and the latest transmission solutions.
Oct 9,2024
Exciting Team-Factory Travel for CTS
CTS Factory Outing Travel
Aug 9,2024
Brand new upgrade: YQ Rebrands to CTS®
Brand new upgrade: YQ Rebrands to CTS®
Apr 30,2024
CTS® at Hannover Messe 2024
CTS-ChinaTransmissions participate in Hannover Messe 2024.
Apr 15,2024
What Is The CA550 Agricultral Chain?
Agricultural Roller Chains are manufactured of hardened steel parts to close tolerances. They provide high quality, increased strength and longer life within their service range.
Nov 15,2023
What Is Weld-On Hubs ?
Taper Bore Weld-on-Hubs are made out of steel, drilled, tapped and taper bored to receive standard Taper Bushes.
Nov 13,2023
What Is The QD Bushing?
QD bushings, also known as quick-disconnect bushings, are used throughout the industrial power transmission and agricultural industries for various sprocket, sheave, pulley, and synchronized drive needs.
Nov 7,2023
What Is Split Taper Bushing?
The split tapered bushing alleviates the need to have a component bored to size, ideally lowering on hand requirements and allowing for changes in shaft size if necessary. The barrel of the split tapered bushing is split in two places and is keyed to the shaft.
Nov 7,2023
What is the manufacture process of v-belt pulley
The manufacture process of v-belt pulley: Material Prepation - Cast Iron - CNC Maching - Grooving - Surface Treatment -Cleaning & Packing
Nov 2,2023
What Is The Manufacture Process Of Locking Assembly
The manufacture process of locking assembly is : Material Preparation - CNC Maching - Bore Drilling - Benching Process - Assemble - Cleaning & Packing
Nov 2,2023
What Is Gear Rack?
A gear rack is a type of gear on which gear teeth are cut on one face of a bar. The bar can be square, round or rectangular in cross section and the teeth can be either parallel to the base or set at an angle. They are a simple and common type of element in mechanical drive systems and are always paired with a pinion.
Oct 16,2023
What is Idler Sprocket?
An idler sprocket is an essential component in many mechanical systems. Its primary function is to guide and maintain the proper tension of a chain or belt that is transmitting power.
Oct 16,2023