Industrial Chain and Sprocket Manufacturer

Language:

English

Contact Now！

Home / All / CTS® Company News

CTS® Company News

The Introduction Of Engineering Chain
Engineering chains are widely used in manufacturing, metallurgy, palm oil, sugar, environmental protection equipment, construction machinery, bulk material transportation and other industries.
Sep 27,2022
The Introduction Of Conveyor Chain
The conveyor chain is the same as the transmission chain, and the precision conveyor chain is also composed of a series of bearings, which are fixed by the constraining chain plates, and the positional relationship between them is very precise.
Sep 23,2022
The Introduce Of Conveyor Chain
In fact, the conveyor chain is similar to the transmission chain. The precision conveyor chain is also composed of a series of bearings. They are fixed by the chain plate with restraint function, and the positional relationship between them is very precise. Each bearing consists of a pin and a sleeve on which the rollers of the chain rotate.
Sep 14,2022
The Different Material And Shapes Of Chain
Chains are classified according to different materials and shapes. This article will introduce some different types of chains.
Sep 7,2022
The Cleaning And Rust Prevention Of Chain
These details should not be ignored when the chain is used. The chain may not be removed during cleaning, or the chain may be removed for thorough cleaning. Thorough cleaning is to remove the chain and soak it in a cleaning agent (gasoline or kerosene) for part of the time, then brush it section by section with a brush. After cleaning, immerse the chain in lubricating oil at 70～80℃, make it oil-filled, and then install and use it.
Sep 1,2022
What is a Drive Pulley?
This AK17 Pulley 5/8" bore is directly interchangeable with other manufacturers, is 1.75" in diameter, is used with A style V-Belts.
Aug 12,2022
The Introduction Of Weld On Hubs
Weld-on hubs are constructed for use with taper bushes, offering a cost-effective option for stable mounting of ventilators, fan propellers, plate sprockets, and other equipment on a shaft.
Aug 11,2022
KC Coupling
Selection of KC Coupling
Aug 11,2022
Brief introduction of ANSI roller chain
In the United States , power transmission chains must meet ANSI B29.1, thus earning the name ANSI chains . In other countries , the chains must meet IS B1801, ISO 606A, or ISQ 1395C.
Aug 5,2022
The Difference Between Sprockets and Gears
Sprockets and gears are both used to transmit power within machines or to move items by interlocking with them. But what's the difference between them?
Aug 5,2022
The Introduction Of Bushing
The taper sleeve is mainly divided into Taper Lock Bushing, QD Bushing and Split taper bushing. The holes where the taper sleeve and the pulley match are half-sided, and the two light holes on the taper sleeve and the two threaded holes on the pulley are respectively A complete hole is formed, and a threaded hole on the taper sleeve and a smooth hole on the pulley form a complete hole. When assembling, put the two screws in the two threaded holes of the pulley.
Aug 2,2022
The introduction of chain coupling
The chain coupling uses a common chain and meshes with two parallel sprockets with the same number of teeth at the same time. The main difference between the chain couplings of different structural types is the use of different chains. Roller chain coupling, toothed chain coupling, nylon chain coupling, etc.
Jul 18,2022