Industrial Chain and Sprocket Manufacturer
CTS® Company News
Introduction Of Circular ChainThe circular chain is suitable for coal mine scraper conveyors, coal ploughs, drum shearers and other mechanical traction chains, etc.Dec 6,2021- Chain Drive Compared With Belt DriveThe chain drive has no elastic sliding and slippage, and can maintain an accurate average transmission ratio; the required tension is small, and the pressure acting on the shaft is also small, which can reduce the friction loss of the bearing; the structure is compact; it can work at higher temperatures and oil stains. Work under harsh environmental conditions. Compared with gear transmission, chain transmission requires lower manufacturing and installation accuracy;Nov 24,2021
- Mechanism Of Chain DriveChain transmission is a transmission method in which the movement and power of a driving sprocket with a special tooth profile is transmitted to a driven sprocket with a special tooth profile through a chain.Nov 22,2021
- The Introduction Of Different SprocketsThe sprocket functions as a timing belt and is an important part of the engine valve system. It is connected with the crankshaft and matched with a certain transmission ratio to ensure the accuracy of the intake and exhaust time. The function of the sprocket is the ignition sequence (time) of the piston stroke (up and down movement) of the valve opening and closing when the engine is runningNov 18,2021
- Advantage and disadvantage of rigid flange couplingRigid flange couplings are commonly used in large, straight shafts where tight alignment tolerances must be maintained.Nov 18,2021
- Different Types Of GearGear is a mechanical part with teeth on the rim that can continuously mesh and transmit motion and power. Gears rely on the meshing of teeth to transmit torque. The gear is transmitted with other toothed mechanical parts (such as another gear, rack, worm).Nov 16,2021
- All About Chain Couplings - Attributes and SpecificationsChain couplings are three-piece flexible shaft couplings that are used to connect driving and driven shafts in mechanical power transmission assemblies.Nov 16,2021
- Different Types Of CouplingCoupling refers to a device that connects two shafts or a shaft and a rotating part, and rotates together in the process of transmitting movement and power, and does not disengage under normal conditions. Sometimes it is also used as a safety device to prevent the connected parts from being subjected to excessive loads and play a role in overload protection.The following will introduce six different couplingsNov 11,2021
- DOUBLE PLUS ChainDOUBLE PLUS Chain is a new type that meets low noise requirements and high safety standards.Nov 11,2021
- Different Types Of BushingsThe bushing is a matching part used outside the mechanical parts to achieve the functions of sealing, wear protection,Nov 9,2021
- Difference Between Chain Drive and Belt DriveBoth a chain drive and a belt drive are part of mechanisms that allow locomotion and a transfer of power within a particular piece of machinery.Nov 8,2021
- Types of PulleysA pulley consists of a rope and a hub or "drum" in which there is a grooved wheel mounted with an axle.Nov 5,2021
Are you looking for a reliable sprocket manufacturer?
We can quickly provide customers with market analysis, technical support and customized services.Products
Application
about
