Industrial Chain and Sprocket Manufacturer

Language:

English

Contact Now！

Home / All / FAQ /

The introduction of taper lock

Update Time:2022/7/13

The introduction of taper lock

Taper Lock is an advanced basic component that is widely used in the world for mechanical coupling under heavy loads. In the coupling of wheels and shafts, it relies on tightening high-strength bolts to make the pressure and friction between the surfaces to achieve load transmission. a keyless coupling device.

Advantages of taper lock

1. Use taper lock to make mainframe parts manufacturing and installation simple. The machining of the shafts and holes where the taper lock is installed does not require the high manufacturing tolerances required by the interference fit. Taper lock is installed without heating, cooling or pressurizing equipment, just tighten the bolts to the required torque. And the adjustment is convenient, and the hub can be easily adjusted to the required position on the shaft. Taper lock can also be used to join parts with poor weldability.

2. Taper lock has long service life and high strength. Taper lock relies on frictional transmission, there is no keyway weakening of the connected parts, and there is no relative movement, and there will be no wear during work.

3. When the taper lock is overloaded, it will lose its connection, which can protect the device from damage.

4. The taper lock connection can bear multiple loads, and its structure can be made into a variety of styles. According to the size of the installation load, multiple taper locks can also be used in series.

5. The taper lock is easy to disassemble and has good interchangeability. Since the taper lock can combine the hubs with large matching clearance, the bolts can be loosened when disassembling, so that the connected parts can be easily disassembled. When it is tightened, the contact surface is tightly attached without rusting, and it is also easy to disassemble.

How to install taper lock ?